Sublimation Youth Water bottle

These are straight and smooth so you CAN wrap these with a full design. 

You can sublimate, vinyl, or glitter.

• 12oz 350ML
• Stainless Steel
• Comes in a variety of colors

Product Instructions:

Mug Press 

Press Temperature: 325°F
Time: 150 - 165 Seconds
Pressure: Light

• Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
• Place tumbler in press at the press temperature, and close the element around the tumbler
• Press for the specified time above needed using specified pressure
• If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
• Once done, remove the tumbler from the press and remove the transfer paper immediately
• Allow the tumbler to cool completely before use

Oven Settings

Temperature: 395°F
Time: 6 - 7 Minutes
(test in your oven for accurate time)

• Attach reversed printed image to tumbler with thermal tape
• Place tumbler in heat shrink bag or silicone wrap
• Place in oven preheated to 400°F for approximately 6 - 7 minutes (test to determine best timing!)
• Afterwards, remove heat shrink bag / silicone wrap and paper immediately
• Allow the tumbler to cool completely before use