Sublimation Silver Tumbler

NEW FLAT BOTTOM STYLE TO PREVENT GHOSTING

YOU CHOOSE FROM 20oz or 30oz

Glossy, beautiful Stainless Steel and ready to be wrapped tumblers!!!  Choose your favorite graphic!! Includes lid and plastic straw! 

You can bake these in a convection oven for a wrap or apply a sublimation decal on it!

Product Instructions:

Oven Settings

Temperature: 395°F
Time: 6 - 7 Minutes
(test in your oven for accurate time)

• Attach reversed printed image to tumbler with thermal tape
• Place tumbler in heat shrink bag or silicone wrap
• Place in oven preheated to 400°F for approximately 6 - 7 minutes (test to determine best timing!)
• Afterwards, remove heat shrink bag / silicone wrap and paper immediately
• Allow the tumbler to cool completely before use

Mug Press (10oz, water bottle element)

Press Temperature: 325°F
Time: 150 - 165 Seconds
Pressure: Light

• Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
• Place tumbler in press at the press temperature, and close the element around the tumbler
• Press for the specified time above needed using specified pressure
• If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
• Once done, remove the tumbler from the press and remove the transfer paper immediately
• Allow the tumbler to cool completely before use